VOLLSUN V12505 Tie Rod Assembly Left for BMW 3 Series E46/E36 OE 32106777503
Product
- VOLLSUN No.
- V12505
- OE Number
- 32106777503
- Interchange Numbers
- 32211096897 / 32106777503 / 32211095955
- Product Type
- Tie Rod / Tie Rod Joint
- Brand
- VOLLSUN
- Listed Application
- BMW 3 Series E46 / E36; Z4 E85
- Category
- Steering System / Tie Rod / Tie Rod Joint
VOLLSUN V12505 left tie rod assembly for BMW 3 Series E46/E36 and Z4 E85. Listed OE reference 32106777503. Confirm fitment and send a wholesale inquiry online.
Original product photograph composited onto an AI-generated background. Installation context illustration.
Product Identification
| VOLLSUN No. | V12505 |
| OE Number | 32106777503 |
| Interchange Numbers | 32211096897 / 32106777503 / 32211095955 |
| Product Type | Tie Rod / Tie Rod Joint |
| Brand | VOLLSUN |
| Listed Application | BMW 3 Series E46 / E36; Z4 E85 |
| Category | Steering System / Tie Rod / Tie Rod Joint |
01 · Front Linkage Layout
Matched Inner and Outer Joints
The assembly is produced around the listed BMW application, with an inner joint, an adjuster sleeve and an outer ball joint arranged to follow the original steering linkage layout.
Before installation, compare the thread direction, sleeve length and ball stud position with the removed tie rod to confirm the unit matches your chassis.
02 · Ball Joint Interface
Steering Response and Wear Control
A tie rod transfers steering input from the rack to the wheel hub. Play in either ball joint changes toe angle, which is felt as vague steering or uneven front tyre wear.
VOLLSUN V12505 is intended for replacement use without vehicle modification. Replacing both sides together is common practice where mileage and wear are similar.
03 · Adjustment Sleeve
Aligning Toe After Replacement
The adjuster sleeve allows the track rod length to be set during a wheel alignment. A four-wheel alignment is required after fitting so that toe returns to specification.
Fitment must be confirmed by OE number and VIN. Production periods and market variants can change which linkage is used on a given vehicle.
Key Features
Listed OE Match
Catalogued for OE 32106777503.
Cross-Reference
Interchange references 32211096897 and 32211095955.
Application Specific
Listed for BMW 3 Series E46/E36 and Z4 E85.
Bolt-On Design
No vehicle modification required.
Fitment and OE Cross-Reference
| Brand | BMW |
| Listed Application | BMW 3 Series E46 / E36; Z4 E85 |
| Primary OE | 32106777503 |
| Interchange Numbers | 32211096897 / 32106777503 / 32211095955 |
| Internal SKU | V12505 |
| Fitment Note | Confirm with OE number and VIN before ordering. |
Original product photograph composited onto an AI-generated background. Installation context illustration.
Application
Application and Replacement Context
The left tie rod assembly is used across the front steering linkage of the listed BMW applications. As steering parts age, the ball joints can develop play and the rubber boots can crack, allowing water and grit to enter the joint. A replacement assembly restores the connection between the steering rack and the wheel hub so that toe can be set correctly during alignment. Wholesale buyers commonly stock both sides so that a full front linkage service can be completed in one visit.
Installation and Maintenance
- Confirm OE 32106777503 and the chassis application before starting work.
- Raise and support the vehicle, then remove the wheel on the working side.
- Loosen the lock nut on the adjuster sleeve and separate the outer ball joint from the hub carrier.
- Fit the new assembly, reconnect the outer joint and set the sleeve to approximately the original length.
- Carry out a professional four-wheel alignment and inspect the opposite side for matching wear.
Quality and Ordering Notes
- Verify the OE number and the listed BMW application before ordering.
- Check the ball joint boots and the adjuster sleeve locking nut after installation.
- For wholesale or private-label programmes, send your company and application details through the inquiry form below.
Frequently Asked Questions
Is VOLLSUN V12505 the same as OE 32106777503?
V12505 is the VOLLSUN part number listed for OE reference 32106777503. Always confirm the number on the original part before ordering.
Which vehicles is this tie rod listed for?
The official catalogue record lists the BMW 3 Series E46/E36 and Z4 E85. Fitment can vary by market and production period, so the OE number remains the safest confirmation point.
Should both sides be replaced together?
Where wear is similar on both sides, replacing the left and right assemblies together helps keep steering response balanced and avoids a second alignment.
Is an alignment required after fitting?
Yes. A four-wheel alignment is required so that toe is reset to the manufacturer specification after the new assembly is installed.
What are the cross-reference numbers?
The catalogue lists interchange references 32211096897 and 32211095955 alongside the primary OE 32106777503.
Do you support bulk supply?
Yes. For wholesale requirements, submit your quantity, destination and application details using the inquiry form below.
Product parameters
- VOLLSUN No.
- V12505
- OE Number
- 32106777503
- Interchange Numbers
- 32211096897 / 32106777503 / 32211095955
- Product Type
- Tie Rod / Tie Rod Joint
- Brand
- VOLLSUN
- Listed Application
- BMW 3 Series E46 / E36; Z4 E85
- Category
- Steering System / Tie Rod / Tie Rod Joint
Can't find the part you need?
vollsun@163.com
Phone
+86 020-34366474
Address
No. 1540, Guangyuan East Road, Guangzhou, China.